Paint stripper

The metal alloy paint remover is processed by a variety of strong solvents according to the formula and process. The odor is small, and paraffin wax is attached to the surface, which not only inhibits volatilization, but also guarantees the lasting power of the paint remover. It has a good shedding effect on acrylic, polyurethane, electrophoretic paint and other coatings attached to the surface of alloy metal, and can solve the problem of waste losses caused by painting errors during the production process.

DRL-305 gold paint remover is processed by a variety of powerful solvents according to formula and process. The odor is small, and paraffin wax is attached to the surface, which not only inhibits volatilization, but also guarantees the lasting power of the paint remover. It has a good peeling effect on various coatings such as acrylic, polyurethane, and electrophoretic paint attached to the surface of the alloy metal, and can solve the loss of waste products caused by painting mistakes in the production process of enterprises.

★Easy to use: Just soak and use at room temperature, no need to heat or use cleaning machinery.

★ Economical and practical: it can be used repeatedly during the soaking process.

★Safety: This product has little smell, does not burn, and is suitable for various occasions.

★ No damage or corrosion to the workpiece substrate.

Scope of application
: Widely used in high-end product manufacturing industries such as mobile phones, digital cameras, laptop casings, precision hardware, and automobiles.

Instructions for use
● Soaking method: Soak all the workpieces that need to be stripped in the paint remover for 10 to 20 minutes. The paint film will all fall off. After taking it out, go through a rinsing process and soak it in still water. In the case of large and complex products with inner holes and slots, use high-pressure water to remove the residual paint attached to the surface of the workpiece, the effect is better.

● Painting method: For large workpieces, you can use a hair brush or cotton brush to apply the paint remover to the parts that need to be removed. For workpieces with thick paint films, you can apply it repeatedly 2 to 3 times until the paint film completely falls off, and then clean it. The process is the same as above.

Note
▲ This product has layers, please shake it up and down evenly before use.

▲ This product is irritating to the skin, so wear rubber gloves when using it.

▲ If it accidentally touches your skin, please rinse with water immediately.

▲ This product contains organic components, which are volatile, and should be operated in a well-ventilated environment.

▲ When the working fluid is not in use, it should be sealed and sealed. Store at room temperature and avoid sun exposure.

▲ This product is corrosive to some plastics and organic glass, so please use it with caution.

▲This product can be sealed with water, which greatly reduces air pollution and prevents self-loss caused by evaporation.