718 net washing water is

The main component of net washing water is isophorone, and others include xylene, butyl acetate, and acetone, which are prepared in a certain proportion. Mainly used as a cleaning agent for the screen and workpiece after printing ink during screen printing. Screen washing water with qualified quality has good effects on plastic surface printing ink, organic glass surface printing ink and various screen printing, and will not damage the workpiece.
        718 Screen Cleaner is an environmentally friendly screen cleaner specially developed for printed circuit boards and screen printing. Using 718 screen washing water can effectively remove various screen printing inks, especially suitable for cleaning screen printing green oil without damaging the screen printing screen.
718 net washing water features:

1. Colorless liquid, will not cause damage to the screen printing screen.
2. No bad odor and slightly fragrant.
3. Low volatility.
4. 718 screen washing water has unique dissolving ability, especially suitable for screen cleaning of SMT board with small aperture, high density and fine pitch .

718 physical characteristics of washing water

Appearance: Colorless clear transparent liquid.
Density ( 20 ℃): 0.970~0.975g/cm2 .
Water Solubility: Miscible.
Usage: Either dipping or scrubbing.

Precautions for 718 net washing water: The storage of
        718 net washing water needs to be closed and fully ventilated. Operators must undergo special training and strictly abide by operating procedures. It is recommended that operators wear filter gas masks (half masks) and anti-static overalls. Keep away from fire and heat sources. Smoking is strictly prohibited in the workplace. Use explosion-proof ventilation systems and equipment. Prevent vapors from leaking into the workplace air. Avoid contact with oxidants, acids, alkali metals, and amines. The flow rate should be controlled during filling, and a grounding device should be installed to prevent the accumulation of static electricity. Equipped with corresponding varieties and quantities of fire-fighting equipment and leakage emergency treatment equipment. Empty containers may be harmful residues. Store in a cool, ventilated warehouse. Keep away from fire and heat sources. Keep out of direct sunlight. The packaging requires sealing and should be stored separately from oxidants and acids. The lighting, ventilation and other facilities in the storage room should be explosion-proof, and the switches should be located outside the warehouse. Equipped with the appropriate variety and quantity of fire equipment. Fire and explosion prevention technical measures must be taken during tank storage. It is prohibited to use mechanical equipment and tools that are prone to sparks. When handling, load and unload with care to prevent damage to packaging and containers.