Product introduction:
Anmei aluminum cleaning agent is composed of a variety of organic compounds and a variety of active agents. This product has a small smell and does not pollute the environment. This product contains certain corrosion-inhibiting materials and will not cause corrosion to stainless steel, aluminum alloy and iron products, causing them to become white or hazy.
Performance advantages:
1. The product does not contain any heavy metals and halogens and complies with RoHS2.0 requirements.
2. The product is non-corrosive and will not cause harm if it sticks to your hands. Just wash it off with water in time.
3. The product does not contain phosphorus, and there is no difficulty in water treatment.
4. No safety hazards---This product is not flammable or explosive and is easy to store.
The main purpose:
Aluminum cleaning agent is suitable for the cleaning of stainless steel and aluminum alloy products for oil and ash removal; it is generally used together with wax removal water, and it can also be used alone to remove cutting fluid, cutting oil, mold release agent, etc.
Instructions:
1. Water mixing ratio: 10%;
2. Time: 4-6mins, depending on specific working conditions;
3. Temperature: 70-75°C;
4. Cleaning method: soaking, ultrasonic cleaning is faster and more effective;
5. Maintenance of working fluid: The working fluid can be recycled. If it cannot be washed, add a certain amount of original solution. After cleaning for a period of time, if the tank solution is dirty, it needs to be replaced;
manual:
1. After cleaning the cleaning tank, mix it with clean water at a ratio of 10% and stir evenly;
2. The temperature rises to 70-75℃;
3. Start cleaning. After cleaning, rinse with clean water;
4. If it cannot be washed, add a certain amount of original solution. After cleaning for a period of time, if the bath liquid is very dirty, the bath liquid must be replaced;
Precautions:
1. This product cannot be mixed with acidic substances;
2. After contact with skin, rinse skin thoroughly with water;
3. In case of eye contact, immediately rinse the upper and lower eyelids with plenty of water, and then send to an ophthalmologist for treatment;
4. Storage tanks and working places comply with current laws and regulations;
5. Store in a cool, dry and well-ventilated place;
6. When not in use, the lid should be tightly sealed in time and stored separately from incompatible substances such as oxidants;
Typical data:
project |
Detection method |
Product parameters |
Exterior |
visual inspection |
colorless liquid |
odor |
sniff |
slight smell |
PH |
GB/T9724-2007 |
Around 12-13 ( 10g/L ) |